花椒风味油的制取及品质研究

以花椒果皮为原料,采用大豆油热浸法制取花椒风味油。以花椒风味油的酸价、过氧化值和感官评分为考察指标,通过单因素实验和正交实验优化制取工艺条件。采用顶空固相微萃取-气相色谱-质谱联用技术对花椒风味油和大豆油中挥发性风味成分进行测定。结果表明:制取花椒风味油的最佳工艺条件为浸提温度95℃、浸提时间20 min、花椒果皮添加量15%,在此条件下制取的花椒风味油香气浓郁、麻味足、色泽好且感官评分最高,其酸价(KOH)为0. 40 mg/g,过氧化值为5. 07 mmol/kg,感官评分为9. 1。花椒风味油中维生素E总量为1 869. 86 mg/kg,远高于大豆油中的742. 07 mg/kg;甾醇含量相较于大豆油几乎不变;脂肪酸组成与大豆油的基本相同;花椒风味油中共鉴定出9类83种挥发性风味成分,大豆油中共鉴定出8类25种挥发性风味成分,花椒风味油中挥发性风味成分主要是烯烃类和醇类(相对含量86. 99%),大豆油中主要是烯烃类和醛类(相对含量87. 26%);花椒风味油中醇类18种,占总量的40. 97%,大豆油中醇类仅1种,占总量的1. 74%;花椒风味油中醛类物质含量仅为1. 91%,而大豆油中醛类物质含量为12. 69%。     

自动捕捉平衡系数试验电流工具设计

在电梯平衡系数传统测量方法中,存在电梯轿厢和对重平衡点难以判断、人为因素导致测量误差偏大、测量不准导致效率低等问题,为解决这些问题,设计出一款基于光电传感器和霍尔传感器的电流自动捕捉工具,除能够高效准确识别电梯轿厢和对重平衡点的位置外,还能通过无线信号传输处理,利用钳形电流表精确捕捉平衡点位置的电流值。经测试使用,该工具系统消除了在平衡系数测量过程中捕捉电流值的人为因素影响,并解决了无机房不能准确判断平衡点问题,有效的提高了检验工作的准确性和效率。     

兴隆庄煤矿生态系统服务价值评估

以兖州矿区兴隆庄煤矿为例,基于1990-2018年间的遥感影像数据,从供给、调节、支持和文化4个方面对兴隆庄生态系统服务价值进行测算评估,并分析其动态变化度及敏感性。评估结果表明,总生态服务价值表现为先增加后减少,1990-2010年矿区生态系统服务总价值从18841.5万元增加至29034.2万元,主要原因是采煤塌陷导致耕地向塌陷水体转变以及林地面积的增加;2010-2018年生态总价值减少了2484.8万元,主要在于耕地大规模地转变为建设用地以及区域地下水位下降造成的水域面积减小。敏感性分析显示,耕地和水体是平原矿区生态系统服务价值最敏感的因素,耕地的敏感性指数由1990年的0.79降为2018年的0.28,说明其在生态服务价值中的影响逐年降低。     

会计信息质量的非线性模型对公司价值的影响

从时代性、行业性及人力资源价值等方面分析了非线性因素对会计信息质量的影响,认为高质量的会计信息应该反映公司价值,并尝试建立了一个非线性模型,据此大体测算公司价值。     

Attitude-behaviour dissonance regarding the importance of food preservation for customers

The aim of the study was to identify the importance of individual food product attributes (the use of preservatives, processing method, shelf-life period and nutritional value) as well as their relation to the purchase behaviour. To achieve this, consumer preferences were decomposed in conditions of full access to information, and data was compared with actual consumer behaviour related to making purchasing decisions in front of the store shelf. Based on data from 338 respondents, conjoint analysis and repeated ANOVA measurements were carried out, allowing to eliminate individual behavioural patterns. The results showed a dissonance between the consumers attitudes towards the attributes and their shopping behaviour. The processing method was the most important declared attribute for consumers, meanwhile this information was the least searched for during purchase. At the same time, shelf-life period marked as the least important was the main information searched for by consumers when shopping. The results also show a clear dislike towards the use of microwaves as a preservation method, while traditional thermal preservation was marked as the most positive for consumers. In addition, consumers were classified into 3 heterogeneous groups, identifying differences in the preferences of food attributes. The obtained results have practical value relating not only to the preferences of individual attributes, but also to their various variants. The results can be a guide for companies to properly label food products. The indicated dissonance illustrates the educational gap and related insufficient motivation to get to know the product before buying it. This is extremely important in connection with technological development and new food processing methods.     

Benchmark value determination of energy efficiency indexes for coal-fired power units based on data mining methods

The operational optimisation of coal-fired power units is important for saving energy and reducing losses in the electric power industry. One of the key issues is how to determine the benchmark values of the energy efficiency indexes of the units. Therefore, a new framework for determining these benchmark values is proposed, based on data mining methods. First, the energy efficiency key performance indicators (KPIs) associated with the net coal consumption rate (NCCR) were selected based on the domain knowledge. Second, the decision-making samples with minimal NCCR were acquired with the fuzzy C-means (FCM) clustering algorithm, and the corresponding clustering centres were employed as the benchmark values. Finally, based on the support vector regression (SVR) algorithm, the target values of the NCCR were obtained with the KPIs as input, and the energy saving potential was evaluated by comparing the target values with the historical values of the NCCR. An actual on-duty 1000 MW unit was taken as study unit, and the results show that the energy saving potential is remarkable when the operators adjust the KPIs based on the calculated benchmark values.     

汽车悬架球头拉杆冷成形技术

为提高生产效率、改变原来通过车削加工汽车悬架球头拉杆的方式,提出了一种球头拉杆的多工位冷镦成形工艺。基于DEFORM-3D软件建立了有限元模型,对球头拉杆的塑性成形过程进行了仿真,研究了预成形凸模入模角α、预成形凹模圆角R1、终成形凹模圆角R2以及终成形凹模入模角β等工艺参数对球头拉杆成形的影响,并进行了正交试验,以模具在球头拉杆成形过程中所受载荷及工件损伤值为优化目标,获得了合理的工艺参数组合。结果表明:在保证工件成形质量及模具寿命的前提下,当预成形凸模入模角α为30°、预成形凹模圆角R1为12 mm、终成形凹模圆角R2为3 mm、终成形凹模入模角β为60°时,模具载荷及工件损伤有显著的降低。采用优化后的参数进行试模生产,工件成形质量较好,验证了模拟结果的可信性,能够有效地指导工艺设计人员的设计工作。     

初始制动时预测湿式制动器热对流特性的积分方法

湿式制动器对重型车辆安全具有关键影响，以湿式制动器摩擦副间隙的冷却液压油（Automotive transmission fluid，ATF）为研究对象，考虑车辆初始制动阶段流体的黏性摩擦和层流流动特征，利用积分方法建立了摩擦副流体的非稳态能量方程，并获得了能同时满足轴向和径向边界条件的三维温度和热流密度显式解析表达式，通过简化动量方程和多项式分布假设也获得了径向速度和压力的理论解，与以往试验对比表明，压力和温度解析解与试验结果具有较好的一致性，理论模型有望推广用于液黏离合器等其他HVD装置的ATF速度场、温度场和热流密度场的理论预测。     

Latent communities of digital publications: The role of editors,followers, and advertisers

This research explores how digital publications may be turned into something more than just a meeting point for people who are seeking information and may become a latent community. The paper proposes that the network of editors, followers, and advertisers of digital publications determine the user sense of community towards the publication. While the pattern of connections among editors and followers reinforces the sense of community, advertisers act as intruders who weaken the feasibility of building a community. Data were collected from followers of digital publications. The dynamics of the sense of community is described as a process in which informational value and identification are essential to nurturing readers’ soft or hard commitment. Findings indicate that the strong ties between editors and followers as well as the diversity positively impacts on informational value and identification, whereas advertising intrusiveness diminishes the informational value.     

浅谈高压中速磨粉系统在磷酸二铵生产中的应用

通过对磷酸二铵生产造粒特性分析,高压中速磨粉机原理分析,结合实践生产中的工艺需求,利用高压中速磨粉系统将颗粒状不合格品磨成细粉后添加进系统重新喷浆造粒,提高返料添加量,减少不合格品的产生,腾空仓库有限货位,以获取更大的经济价值。